Instructions
Heater Blower Motor Kit for Range Rover Classic 1990-1994
Applies To:
Item: 8844
Fits: Range Rover Classic | '90 - '94
These Instructions are lengthy and available via PDF for easy printing. Click Here for PDF instructions.
PDF files require: 
Get
Acrobat Reader for FREE here
An Atlantic British Exclusive! With the genuine motors unavailable for nearly a year, we decided to develop this all-inclusive kit designed and engineered to replace your failed heater motor flawlessly. This motor replacement (recommended replacement at 150,000 miles) offers top-notch flow performance for your heating, with ample heat for frigid winter temps!
Parts included in Kit #8844:
-
Blower Motor
-
Blower Wheel (already assembled to motor)
-
Gasket Kit Item #BTR3761
-
Mounting Ring
-
Mounting Bracket (has 10-24 x 1 screw, lock washer and 10-24 lock
nut included) -
3 - 10-24 Nylon Insert Lock Nuts
-
3 - #10 External Tooth Lock Washer
-
10 - 11" Cable Ties
-
2 - 1-1/2" Pieces of 3/8" Heat Shrinkable Tubing
-
2 Feet of Electrical Solder
-
2 - Pop Rivets Item #8662
Dash and Heater Box Removal - Tools Needed:
-
Electric Hand Drill
-
1/8 inch drill bit
-
3/16 inch drill bit
-
Soldering Iron
-
Heat Gun
-
#2 Phillips Screwdriver
-
#1 Phillips Screwdriver
-
Flat blade screwdriver
-
Upholstery Tool for prying
-
10 mm deepwell socket
-
3/8 inch socket
-
9/16 inch 3/8 drive flex socket
-
Large diagonal cutters (for clipping the braces on the molded motor mount)
-
Small diagonal cutters
-
Snap ring tool
-
Posi-Drive Screwdriver
-
5/32 Allen Wrench
-
3/8 open end wrench
-
Grinder or Dremel Tool
-
Radio Removal Tool
-
Pop Rivet Tool
Estimated Time: 9 to 10 hours
Preparation:
-
Make sure you have a container to hold all of the hardware you will be
removing -
Move the front seats as far back as possible
-
Make sure you know the codes for the radio and disconnect the battery
Select Model 
