Instructions
Heater Blower Motor Kit for Range Rover Classic 1990-1994
Applies To:
Item: 8844
Fits: Range Rover Classic | '90 - '94
Reinstalling the Instrument Cluster:
1. Position the instrument cluster behind the steering wheel making sure that the 3 connectors feed through the frame. (See photo 125)
Photo 125
2. Loosely secure the 4 nuts holding the instrument cluster in place. (See photos 126 and 127) (These nuts will be tightened in a subsequent step.)
Photo 126
Photo 127
Reinstalling the Radio Surround:
1. Position the Radio Surround "roughly" into place while you feed all of the various cables through the openings in the surround. (See photo 128)
Photo 128
2. Reconnect the fuse box with 4 screws. (See photo 129)
Photo 129
3. Plug in the connector for the heated seats and the cigar lighter. (See photos 130 and 131)
Photo 130
Photo 131
4. Feed all of the dash light connectors through the holes in the surround. (See photo 132)
Photo 132
5. Plug in the EAS connectors. (if equipped)
6. Feed the wiring for the radio through the opening. Don't forget the antenna cable. (See photo 133)
Photo 133
7. Maneuver the surround over the heater control levers and secure with the nut and washer on the right side (photo 134) and the screw and washer on the left side (photo 135)
Photo 134
Photo 135
Select Model 
