Instructions

Range Rover 4.0 / 4.6 (1995-2002) Coil Spring Conversion Kit With EAS Override Harness

Applies To:

Item: 9520LB, 9520LBHD
Fits: Range Rover 4.0 (P38) | '95 - '02
Range Rover 4.6 (P38) | '95 - '02

These Instructions are lengthy and available via PDF for easy printing. Click Here for PDF instructions.

PDF files require: Get Acrobat Reader for FREE here

This kit is an exclusive Atlantic British Ltd. offering, designed to replace the electronic air suspension (EAS) with a coil spring suspension. This kit will allow operation of the message center and override the fault codes related to the electronic air suspension. It is intended to replace the air suspension system in Range Rovers 4.0 / 4.6 beginning with the year 1995. It is strongly recommended that new shocks also be installed with this system for best performance. The estimated time for a qualified person to install this kit is 4.0 hours. The only special equipment recommended would be a lift. The new ride height will be approximately 32 inches to the top of the wheel well in the rear and 31-3/4 inches to the top of the front wheel well. This is approximately the height of the factory standard height. This provides the greatest suspension travel while still providing reasonable access to the car.

Parts included in Kit #9520LB:

4 - Aluminum Spring Perch Adapters
AB Part # 8006

4 - Coil Spring Seats
Part # NRC9700G

2 - Front Coil Springs (white stripe)
AB Part # 8002

2 - Rear Coil Springs
AB Part # 8004

1 - EAS Override Wiring Harness
AB Part # 8007PT

4 - Air Line Caps
AB Part # 1034

8 - Lock Nuts
AB Part # 1019

10 - Nylon Ties
AB Part # 1017

2 - Front Coil Isolators
Part # RBC100111G

8 - Nuts for Coil Isolators
AB Part # 1014

2 - Rear Coil Isolators
Part # ANR2938

4 - Bump Stops
AB Part # 8018

4 - Spring Retainers
 AB Part # NTC6106

1 2 3 4 5 6 7 8 9 10 

Complete Product Instructions List Page