Shopping Cart
Instructions
Range Rover 4.0 / 4.6 (1995-2002) Coil Spring Conversion Kit With EAS Override Harness
Applies To:
Item: 9520LB
Fits: Range Rover 4.0 (P38) | '95 - '02
Range Rover 4.6 (P38) | '95 - '02
Section 2 Continued
Photo 17
Remove the nut at the ground feed and install the remaining wire to it. Replace the removed nut. (photo 18) Replace the seat surround.
Photo 18
4. Next you will need to remove the ride height switch located in the center of the dash. (photo 19)
Photo 19
There are two latches on the top and bottom of the switch that you need to compress to remove the switch. (Note the location of the clips that hold the switch in place in the picture.) (photo 20)
Select Model 
