Atlantic British Ltd. - Largest Independent Supplier of Parts & Accessories for Land Rovers

Section 2 Continued

Photo 14

3. Mount the EAS Override Module on the outboard seat support using the self drilling screws (photo 15) 

4. Connect the EAS Override Module as follows: Unplug connector C114 and plug it into the corresponding connector on the EAS Override Module. (photo 16) Plug the other connector on the EAS Override Module into the socket where you removed connector C114. (photo 17)

Photo 17

Locate the fuse box on the right hand side of the body control module. (Large unit under the right seat). Remove the nut at battery feed #1 and connect the wire that has the inline fuse in it to the stud at battery feed #1. Reinstall the removed nut and wire. (photo 18)