Shopping Cart
Instructions
Range Rover 4.0 / 4.6 (1995-2002) Coil Spring Conversion Kit With EAS Override Harness
Applies To:
Item: 9520LB
Fits: Range Rover 4.0 (P38) | '95 - '02
Range Rover 4.6 (P38) | '95 - '02
Section 2
This section will address the electronics of the system. We will disable the lights and switches affiliated with the air suspension. This will prevent the lights on the console from flashing and leave the message board operational.
1. Disconnect the battery (be sure to have the radio code first).
2. Remove the lower seat surround at the right front seat as follows:
Remove the fuse door; remove the screw retaining the surround.
| |
|
Remove the three fir tree nails holding the surround in place. This will expose the body electrical control module. (BECM). (photo 11) Locate battery feed #1, as you face the BECM it is just to the right of the fuse box. It has a brown pink wire. (photo 12)
| |
|
| Photo 12 |
Photo 13 |
Locate the ground feed to the BECM farthest to the left or rear. (photo 13) Locate connector C114 a green 20 way connector at the front of the BECM bottom row second one from the end. (photo 14)
Select Model 
