COVID-19 - We're in this together. UPDATE: We're operational and taking orders online and via phone. Read More
Video: Jerry Can Seal Replacement
VIDEO
Watch Doug, our Land Rover Master Technician, remove the old seal and re-install a new Jerry Can seal on our NATO-Style Jerry Cans . Questions about this video? Call us at 1-800-533-2210 or contact us at https://www.roverparts.com.
Part #: GJC99: Replacing the Jerry Can Seal on NATO-Style CansHi I'm Doug. Your tech support representative here at Atlantic British. We want to touch base on the replacement of the cap seals on our NATO-style Jerry Cans, both the 10 liter and the 20 liter. We've gotten some feedback from customers that have had an issue with installing the seals and we just want to make sure that everybody is clear and make it easy to install. It really is an easy job. Essentially what we're going to do is replace this seal right here. And I think the one thing that a lot of people have been missing, because they really don't give you any instructions with these, is that one side of this seal is beveled, and one is a nice open flat area, and that's the side that should really be facing down and making contact with the can. So to replace these, all you really going to do is take a small pick tool. And if you don't have one you can pick one up anywhere, or even one of those small little pocket screw drivers will work. And get up underneath that seal and lift up and out. And you'll probably notice a difference that the older one is going to be soft and pliable, the new one is a bit stiffer which is good. Probably what this was like when it was new. And I find the easiest way, first off, make sure the flat surface is facing out. And if you tuck the inside edge in first and then push the outer edge in, you'll find that it seats much easier. Now this is a bit stiffer than the one that you took out. So it's going to take a few minutes of working it around because you want to make sure that this is properly seated all the way around. It's not lifted up over one of the edges. Lift up there. You have a thumbnail, that will definitely be helpful. See now even this one right here. Definitely works better if you do the inner edge first. Fold it in so the inside, and then push the outside. Then just run your finger around to feel for any raised areas, or any areas where you feel the seal is not fully locked in. And there you go. You have good tight contact all the way around the outside so you know when you close it you're going to have good contact on the top of the can. And you just want to do a little test fit. Feels like it locks down. And you can feel that it is a bit tighter than the old one. So, that's the proper way of replacing that seal. Now you can buy the seal individually, this is, our part number GJC99. And then there's also a kit of three if you have multiple cans, you need change them over you can get three in one shot and save yourself a little bit on the shipping. So, when you're ready to changeover the O rings on your Jerry Cans, just give a call to any of our knowledgeable salesman at 1-800-533-2210. Or if you'd like you can click on this link and you can order your part online. And if you find our videos are helpful, and you'd like to see more of them, click on this link you can subscribe to our YouTube channel. So when you're ready to do so, just give us a call or go online. So we thank you for watching and Rover on.
This video has been viewed: 4848 times
1) Select Year
2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958 1957 1956 1955 1954 1953 1952 1951 1950 1949 1948
2) Select Model
What Our Customers Are Saying
Great assortment and fast, friendly service.
Kevin M.Lisbon, ME
9 days ago
Friendly, helpful, knowledgeable staff and I got my part way before I expected it.
Josh H.Pingree, ID
10 days ago
Great parts, great service, and quick delivery!
Matt A.Fort Smith, AR
11 days ago
Great service through and through. From quality products to instructional videos.
Jayson M.Corona, NY
16 days ago
The staff is very friendly, helpful, knowledgeable And they go out of their way to make sure you have the correct parts you need!
Joseph P.Mansfield, OH
18 days ago
The part I needed was easy to find, and the video instruction to install was perfect. I couldn't be happier.
Bryce N.Minneapolis, MN
19 days ago
You folks are a wealth of knowledge and you don't mind sharing it. My parts have always been perfect both in quality and shipping.
Michael S.Rocky Hill, KY
23 days ago
Very nice and easy to talk to! You guys made the order process easy.
David B.Santa Fe, NM
24 days ago
Your prices are great! I can't believe how fast my package was shipped and how well it was packed!
Nick P.Meadville, PA
26 days ago
Decades of great, friendly, competent service with good prices!
Gene P.Micanopy, FL
30 days ago
Shop by Vehicle
Shop by Category
Reviews from our Customers...
Previous Slide ◀︎Next Slide ▶︎
FAST Shipping! Call these Folks they have all the answers to your part installation.
-Bill M. (Boydton,VA)
Great customer service, very knowledgeable staff. Everyone I have worked with are Land Rover owners- which is a big help for knowing the vehicles.
You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers
-Keith B. (Blue Ridge,VA)
Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.
-Alan R. (N. Chelmsford,MA)
FAST Shipping! Call these Folks they have all the answers to your part installation.
-Bill M. (Boydton,VA)
Great customer service, very knowledgeable staff. Everyone I have worked with are Land Rover owners- which is a big help for knowing the vehicles.
You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers
-Keith B. (Blue Ridge,VA)
Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.
-Alan R. (N. Chelmsford,MA)
You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers
-Keith B. (Blue Ridge,VA)
Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.
-Alan R. (N. Chelmsford,MA)
First slide details. Current Slide Second slide details. Third slide details. Fourth slide details.
Select Your Vehicle
