Instructions

Heater Blower Motor Kit for Range Rover Classic

Applies To:

Item: 8844
Fits: Range Rover Classic | '90 - '94

Reinstalling the Dash Top:

1. Reconnect the AC thermostat connector. (photo 113)

Photo 113

2. Maneuver the AC plenum into position making sure to feed the wires for the mirror control and clock through the opening. (See photos 114 and 115)

Photo 114

Photo 115

3. Loosely attach bolts holding the plenum in place. (See photos 116 and 117)

Photo 116

Photo 117

4. Maneuver the dash top back into place making sure to line the inboard heater defrost hoses up, and position the front-most edge of the dash between the metal bracket and the rubber gasket. You can run your screwdriver along the edge to get the gasket on top of the dash. (See photo 118) Make sure that you have fed all the connectors and cable for the instrument cluster and the security LED through the openings in the dash top. (See photo 119)

Photo 118

Photo 119

5. Plug the security LED cable from the small tray (center of dash) into the cable that was just fed through the dash. (See photo 120)

Photo 120

6. Secure the small tray with 4 screws. (See photo 121)

Photo 121

7. Install 3 screws holding the dash to the AC plenum that were marked in the disassembly process. (See photos 122 and 123)

Photo 122

Photo 123

8. Loosely install the 4 screws in the dash recess behind the grab bar on the right side of the dash. (See photo 124)

Photo 124

 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 

Complete Product Instructions List Page