An Atlantic British Exclusive! We've specially-developed this Land Rover trailer wiring kit for Discovery Series II 1999 – 2004 model vehicles. Our kit seamlessly converts your Land Rover wiring plug to a standard 'Flat 4' North American spec plug. Each quality harness kit is dependable and costs a fraction of the genuine versions. They feature a rubber plug cap to protect the exterior trailer plug from the elements and easy plug-and-go installation means they can be installed in minutes. Stop and turn functions rated for up to 5 amps. Taillight function rated for up to 6 amps.
Complete instructions included.
Atlantic British Ltd. Repair & Maintenance Academy How-To Video: Watch how to install a trailer wiring kit on a Discovery Series 2. The trailer wiring kit shown includes all the wiring and connectors needed for the install. Still have questions after you watch the video? Please call us at 1-800-533-2210. Questions about this video? Call us at 1-800-533-2210 or contact us via live chat.
(Total of 15 customer reviews) | Review this item
5 out of 5 stars | Date Posted: 08-15-2016
By: Roger Redden
This kit was used to replace the kit uHaul installed. Easy and precise instructions and it's super easy and works perfectly. This is THE solution for trailer wiring on your Rover. Good product build, good directions and works! I would recommend this for anyone and any skill level. AA++
5 out of 5 stars | Date Posted: 07-15-2016
By: Misty Mullenbach
After finding out what a shop wanted to charge. I found this wirering kit. I purchased it and was shocked how easy it was to install. Very happy with my purchase.
5 out of 5 stars | Date Posted: 05-06-2016
By: Ian Boysen
Like the other ratings, a quick and easy install, and it just works!
5 out of 5 stars | Date Posted: 04-25-2016
By: Glenn Meyer
I ordered this before I picked up my new trailer.The OEM piece is over 300.It came as the shows,complete.I was the video,and installed in10 minutes! It is perfect.4 PIN,I think they have the adapter cable if you need round 7.Just get it.Great product,as all their stuff is,well designed and built!
5 out of 5 stars | Date Posted: 08-21-2015
By: James McCue
Plugged right in and only took ten minutes to install. Works as it should.
5 out of 5 stars | Date Posted: 08-17-2015
By: Dana James
Easy install took probably 20 minutes. I turn a slow screw driver.
5 out of 5 stars | Date Posted: 07-28-2015
By: Mike Story
This is perfect for a small trailer using the standard 4 prong. It would be nice to see the full set-up for additional trailer wiring though.
4 out of 5 stars | Date Posted: 06-11-2015
By: Gary Smith
I like this kit because the instruction was easy to follow. I can now tow with my LR.
5 out of 5 stars | Date Posted: 05-11-2015
By: Herbert Wasson
My 2004 DII had an aftermarket install that the shop went the extra mile of soldering the wires into the harness. A pain since the harness does not come out of the lamp hole so you have to work down in the hole. I cut the added wiring and used liquid electrical tape to seal up the damage. Once this unit arrived it only took a few minutes to install. I put dielectric grease on the connector hooked it up and everything worked. My only complaint is that mine did not come with double sided tape on the module but I had some so it was not a deal breaker. Makes the connection quick and easy, why make your life more difficult to save a few bucks and then have to undo it later.
5 out of 5 stars | Date Posted: 03-09-2015
By: Richard Rivero
Product came as listed. Easy to install. Appears to work great.
5 out of 5 stars | Date Posted: 12-05-2014
By: Arthur Kania
It was snowing, it was windy and it was cold. Not the time you want to really work on a car, nevertheless fidgit with zip-ties. But as the instructions states you only needed to take the right rear light out and feed the wire through. Super quick and have since dragged that connection through all sorts of mud, water and salty snow. No problems, no worries.
5 out of 5 stars | Date Posted: 07-29-2014
By: Daniel DeMers
It was as advertised. Only tool needed was to remove right rear taillight assembly
5 out of 5 stars | Date Posted: 07-01-2014
By: Robert Thompson
I almost wired up my own to save a few bucks but was super glad I did this. Installs in 5 minutes and works perfectly every time.
5 out of 5 stars | Date Posted: 06-06-2014
By: Aaron Kingsbury
Quick and easy install! It took me 10 minutes start to finish.
5 out of 5 stars | Date Posted: 05-05-2014
By: Jason Robb
GREAT EASY TO READ INSTRUCTIONS, KIT WAS COMPLETE WITH ALL MOUNTING HARDWARE, EXTREMELY EASY INSTALL
san miguel de allende, MX
SIGN UP for Exclusive Offers & Latest Deals
Please wait while we calculate your shipping cost.....