The chassis mount design has been carried over but the bar assembly is all new to suit the 2014-on model LR4 and now provides provision for the original equipment headlight washers.
NOTE: Bar comes in matte black powder coat and can be painted to match vehicle exterior. Lamps shown in photos are additional / optional.
Lift jack points are located directly below the buffers. The lift jack point is welded directly to the upright on either side and is designed to prevent the lift jack from interfering with the buffer.
The press formed top pan includes laser cut holes for fitment of a range of compatible driving lights.
A 4mm aluminium press formed winch cover panel, for when no winch is being fitted, is supplied with the LR4 Summit Bar. When fitted the winch cover panel is recessed in the press form top pan to give a level and integrated appearance. The cover is supplied in a satin black powder coat finish.
Two aerial mounts are welded to the center cross tube to allow fitment of aerials/antennas. Synchro pulse controlled welding is used for a visually appealing weld with seam quality that it comparable with that of a TIG weld.
The center under pan protection panel includes laser cut and folded flaps to both add to the strength of the panel and to aid with air flow to the radiator. The center and side protection panels are manufactured from laser cut and folded 2mm steel. These panels are finished with a zinc rich primer and a top satin black powder coat.
The ARB Summit Bar for the Land Rover LR4 includes provision for the original equipment front parking sensors. Parking sensors have been mapped in their original position on a standard equipment LR4 HSE. When fitted to the ARB Summit Bar, the outer sensors are located approximately 70mm higher than the OE condition. The two central positions are approximately 80mm higher than the OE condition. When fitted with larger diameter tires and / or aftermarket suspension (if available) these parking sensor positions and hence range may also be affected. Further real world testing has been conducted evaluating the operation of the sensors against such items as trash cans, parking bollards, wire fences, large rocks and step driveway entrances. Test results show that sensor performance is replicated as close as practical with the change in height of the sensors location. When fitted, the parking sensors sit proud of the face of the bar. If the vehicle is not fitted with the OE parking sensors blanking plugs are included.
The Summit Bar range has an integrated control box mount that recesses the control box lower in the pan. Different mount holes and control box mount brackets are provided to suit different winches. Winch Fitting Kit instructions have further information as to which mount hole or bracket is suitable.
The ARB Summit bar for the fits the following winches:
Please Note that adaptive cruise control or the forward camera are not compatible with the ARB Summit Bar. Development was performed on the SE and HSE models and the Summit bar will cater to vehicles with or without front parking sensors and Land Rover’s Surround Camera System.
SIGN UP for Exclusive Offers & Latest Deals
Please wait while we calculate your shipping cost.....