Instructions
Range Rover Side Steps
Applies To:
Item: 9407A
Fits: Discovery I | '94 - '99
Range Rover Classic | '87 - '95
Fitting Kit Contains
4 - M8 x 25 Set Bolts, 4 – M8 Nyloc Nuts, 8 – M8 Penny Washers, 4 – M10 Penny Washers
Unfasten nuts from body support bolts – leaving bolts in place. Position Side Step using front holes in Support Plates to pick up with existing bolts on Chassis. Use two Heavy Duty Washers and tighten bolts up. Drill two x 9mm holes through the rear of the Support Plates and fix 8mm Bolts. Care should be taken not to drill through the cables. Repeat on opposite side.
1
Select Model 
