Seasonal Picks
Print This Page

Instructions

Heated Seat Activation Kit

Applies To:

Item: 2004
Fits: Discovery Series II | '03 - '04

Parts Needed:
BTR3655LNFG - Bezel
YUG102430G - Left Hand Switch
YUG102440G - Right Hand Switch

Begin by removing the trim bezel around the window switches. It will pry off using a tool like our W107T panel popper. Locate and remove the four screws retaining the switch plate.

Under the switch plate, find two electrical plugs. One is green for the left seat. It has 4 wires. Black, green/white, blue/slate and red/brown. And a black for the right seat. It also has 4 wires. Green/white, red/brown, blue/pink and a black.

Install the switches in the open holes in the switch plate. Make sure you install right to the right and left to left. Plug the black plug into the right switch and green plug into the left.

Install the switch plate and retain with the four screws. Install the new trim bezel.

1

Complete Product Instructions List Page