nothing
Cart Summary

0 items in your cart

Your cart is empty.

Subtotal: $0.00

CHECKOUT NOW

Atlantic British Logo


cart

800-533-2210

We're available now or Email Us

Sign in to my account

I forgot my password. Checkout as a Guest

Welcome!

Land Rover Discovery - Headlamp Protection Kit Installation

Applies To:

Item: 9057
Fits: Discovery I | '94 - '99
Range Rover 4.0 (P38) | '95 - '02
Range Rover 4.6 (P38) | '95 - '02

Tools Required

  • Spray Bottle
  • Isopropyl (rubbing) alcohol
  • Water
  • Blow dryer

NOTE: Your X-Pel Light Protection Kit is shipped to you with the left and right sides stuck together face to face. To verify this, check to see that the 3M backing paper is present on both sides of each set. This is done to help prevent damage during shipping. Inserting your thumbnail between the two pieces and pulling them apart can easily separate the pieces.

  • 1. Mix 1 part alcohol to 3 parts water in the spray bottle.
  • 2. Thoroughly clean the surface of the lenses using the alcohol solution. The lenses MUST be free of all grease, wax, tar or dirt. Dry with a lint-free cloth.
  • 3. Before removing any of the paper backing from the light shields, test each piece to assure proper location and fit.
  • 4. For best results, the lenses and the shields should be warm to the touch. This can be accomplished by turning on the lights to warm the lenses and using a blow-dryer to heat the shields.
  • 5. Wet hands and fingers with the alcohol solution and make sure they stay wet throughout the installation process.

Warning: Handling the adhesive with dry fingers with leave permanent visible marks.

  • 6. Carefully remove the backing from the adhesive side of the shield, spray the adhesive with the alcohol solution, and apply the shield to the lens and align with the outer edges of the light. Starting from the center, use the supplied squeegee to force excess wetting solution and air bubbles out to the edges of the shield. Use the blow dryer as necessary to evaporate the excess wetting solution and to keep the shield warm and pliable. Important: To avoid excess moisture from being trapped under the shield and increasing drying time, be sure to squeegee the entire shield several times from the center out using increasingly firm strokes.
  • 7. On curved and contoured surfaces: It may seem as though there is excess material around the edges. This is normal and is no cause for concern. Keep the material warm and continue making short squeegee strokes from the center outward, gradually working toward the edge of the lens. When working toward the edge, spread the excess material out rather than working it all into one spot. Once the excess is properly spread about the perimeter of the shield, the material will easily lay flat on the lens.

NOTE: Light shields may have a slightly hazy appearance after the initial installation. This is caused by residual moisture being trapped under the shield and is normal. The moisture will dissipate over a period of time, depending on ambient temperature and humidity levels. Assuming the installation was done correctly (as much moisture as possible forced out with the squeegee), the haziness should last no longer than 2 weeks. If too much solution was left beneath the shield and all the moisture has not evaporated by this time, there is no cause for concern. The drying time will simply take longer. This condition will not affect the eventual appearance or performance of the shield.

Complete Product Instructions List Page

Select a Category
Select Vehicle Select Your Vehicle

What Our Customers Are Saying

EXCELLENT
4.9
2,196
Average
Reviews

Pricing was excellent and shipping was very fast

David M.
Grosse Pointe Park, MI

3-4-24

Every time I have ordered parts they show up on time, in perfect condition, and they fit no problems. You also have a great help line in case you have questions about the work …

Peter P.
Marysville, WA

3-3-24

I trust that my order will be reviewed and made certain order corresponds to my particular year and model vehicle. Saves a lot of potential headaches.

Norman W.
San Antonio, TX

3-2-24

Website is very clear and intuitive. I can always find what I am looking for in minutes. The checkout procedure is very clear and simple as well.

Jason M.
Carolina Beach, NC

2-28-24

I have never had a bad experience with your company. Every order is correct and shipped extremely fast.

Ron M.
Kimball, MI

2-22-24

Great prices and service.

Brett N.
San Antonio, TX

2-22-24

Your sales representatives are knowledgeable, helpful, and friendly. I recommend you to other Rover owners on a regular basis.

James G.
Staunton, VA

2-21-24

Prompt service and excellent communication.

Chris S.
Ambler, PA

2-21-24

Great selection of products, easy to use website, friendly staff, helpful videos and resources

Ian G.
McMinnville, OR

2-20-24

I have always had excellent costumer service from my Atlantic British sales person. Very knowledgeable and professional.

Michael S.
Mesa, AZ

2-16-24

Reviews from our Customers...

  • FAST Shipping! Call these Folks they have all the answers to your part installation.

    -Bill M. (Boydton,VA)

    Great customer service, very knowledgeable staff. Everyone I have worked with are Land Rover owners- which is a big help for knowing the vehicles.

    You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers

    -Keith B. (Blue Ridge,VA)

    Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.

    -Alan R. (N. Chelmsford,MA)

  • FAST Shipping! Call these Folks they have all the answers to your part installation.

    -Bill M. (Boydton,VA)

    Great customer service, very knowledgeable staff. Everyone I have worked with are Land Rover owners- which is a big help for knowing the vehicles.

    You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers

    -Keith B. (Blue Ridge,VA)

    Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.

    -Alan R. (N. Chelmsford,MA)

  • You always have the parts I need at a great price and everyone Ive ever spoken to has a great knowledge of all Land Rovers

    -Keith B. (Blue Ridge,VA)

  • Professionalism. My sales rep is a rock star, and I value both his technical expertise and his knowledge of your product line.

    -Alan R. (N. Chelmsford,MA)

SIGN UP for Exclusive Offers and Latest Deals

Ask a Question
Notify me when item number is back in stock!
Choose email or text alert (or both.)