10 reviews 5 out of 5 stars
* Note: California law prohibits the sale of any fuel Jerry Cans shown here to California residents.
Replace your knock-off spout with a steel NATO-Style nozzle built to NATO European military spec and manufactured in Europe. This spout features a flexible tip for versatile pouring and a rapid pour internal air vent so you can empty your jerry can quickly.
This spout fits all NATO spec and Atlantic British NATO-style non-CARB jerry cans.
Made in Europe by a NATO manufacturer and for use with European military-spec NATO jerry cans - NATO military quality!
In olive drab green finish.
Tip - Proper Clamping to Prevent Leaks: To prevent leakage, ensure you carefully seat and forcefully clamp down the spout on the can during the first few times of use. We've had reports of leaks that typically are the result of the spout not being fully clamped down or not seated properly on the can lip when clamped. The spout clamp pin can be a bit sticky when used the first few times (due to the paint clear coat on the edges.) Carefully seating the seal and forcefully clamping spout during the first few times of use will ensure the rubber seal on the spout gets the proper lip impression footprint. Also, the clamp pin will be easier to clamp down after first few times of use and with proper seal lip impression footprint.
10 reviews 5 out of 5 stars
Posted 02-17-2023
Verified Purchase
By Mark Allen McCall
It does not leak, and the spout works perfectly. Very durable.
Posted 07-28-2022
Verified Purchase
By Alan R Niederlitz
This spout attaches easily and seems very secure.
Posted 11-24-2020
Verified Purchase
By jon sheriff
Can’t go wrong with Valpro and Atlantic British!!!
Posted 04-23-2018
Verified Purchase
By Dan Rodemsky
I don't have a Rover. I bought a 2017 Ural motorcycle/sidecar. It came with a 5 gallon Jerry can but no spout. I bought one from Ural but more fuel came out of the flange than the spout! After some searching, a Facebook post lead me here. The spout is wonderful but slightly incompatible with the Russian made can. The vent tube in the spout bumps into the tube inside the can. I used a Dremel to trim 1/4" off the spout vent tube. Now it is perfect! I shared my results with fellow Ural riders.
Posted 08-11-2017
Verified Purchase
By Steven Vlietstra
This is the spout everyone needs - no dripping fuel all over the ground.
Posted 03-27-2017
Verified Purchase
By Andy Estep
Perfect for pouring into lawn and garden equipment due to the flexible and small diameter, works in larger tanks also. Good tools in good hands make for good results. Beats those CARB c*&p any day!
Read All 10 Reviews Review this itemTo ensure parts fit your vehicle, please select your rover below.