Item: 88550 (Same Fit As Part # 93260 )
At last, a sensible way to remove and replace your viscous fan clutch without ruining it! The Universal Water Pump Wrench fits bolt-on type pulleys. No adjusting or fiddling. Simply hook on with one hand and hold, then use one of our Fan Clutch Wrenches (32 mm or 36 mm) to remove the viscous fan clutch. Reverse to install. Our professional quality fan clutch wrenches are a full 17" long with enough leverage to easily remove the viscous coupler and fan. Must be used in combination with the Universal Water Pump Wrench to remove viscous fan.
(Total of 9 customer reviews) | Review this item
5 out of 5 stars | Date Posted: 02-18-2019
By: deborah smithey
Wrench is everything they said it would be and arrived when they said.
5 out of 5 stars | Date Posted: 12-24-2018
By: Frank Waters
Using this tool to take off the fan on my LR3 makes it a piece of cake!
5 out of 5 stars | Date Posted: 01-09-2018
By: Mark Crozier
Shipping was quicker than expected Perfect tool for cooling fan removal.
4 out of 5 stars | Date Posted: 12-20-2017
By: Tom Tiedemann
The wrench worked as advertised, how could it not. However, I ordered the wrench after watching the Atlantic British video with Doug thinking that the space behind the fan required the thin wrench Doug used. I could have used a large Crescent wrench to do the job. Check your installation and available wrenches before ordering.
5 out of 5 stars | Date Posted: 11-13-2017
By: Jon Gilliatt
First time using an actual fan clutch wrench, made swapping out a water pump on my P38 so much easier. It's a nice quality, heavy piece, that worked great.
5 out of 5 stars | Date Posted: 06-21-2017
By: Anthony Ruth
I read a few forum threads of people struggling to take the fan off, and I have to say that this tool makes the difference. What took others 30+ minutes, I was finished with in 30 seconds.
5 out of 5 stars | Date Posted: 05-11-2016
By: Robert DeSantis
Right tool for the job Works well you recommend this product to others
5 out of 5 stars | Date Posted: 04-27-2016
By: john jordan
fit perfectly and has an opening for a 5/8 drive ratchet or breaker bar if needed.
5 out of 5 stars | Date Posted: 06-10-2014
By: Russell T. Ball
This wrench is made out of quality steel and is sturdy enough to not bend when force is applied PLUS it is coated in a quality paint to keep rust at bay for many years of use. It came in handy to remove and replace my fan clutch. The fit on the nut was perfect. The addition of a 1/2 ratchet hole in the handle made it easier to apply more torque if necessary. Mine came off pretty easily despite the nut looking as though it had been hammered on with a chisel or sawed on with a hacksaw. The threads on the water pump were not harmed by that action. Quality tools always make a job easier.
SIGN UP for Exclusive Offers & Latest Deals
Questions? Speak with a product specialist.Tap to Call By Phone
Please wait while we calculate your shipping cost.....