Rover Resources Center
Unique Rear Crossmember Replacement For Land Rovers
Restorers Can Save Time and Money! Our Land Rover Master Technician, Doug, offers an option for replacing a rusty and rotting rear crossmember without replacing the entire frame.
Restorers' Can Save Time and Money! Rear Crossmember Replacement on Range Rovers and Land RoversHi I'm Doug and I'm your tech support representative for Atlantic British. And we want to do a little video to show you a very unique product that we have. A very time and money saving product. Now, in a lot of cases if you are a restorer or if you just want to simply update or upgrade your Land Rover, especially in the case of the Defenders, we have a product that can save you a lot of time and money. In most cases, even though the rest of the frame is good, they like to rot in areas right where the bumper inserts are and in the areas close to the middle, and they will rot right through. Now, this is our Project Defender, which those of you who have been following us on are Facebook page have seen we have put a lot of time and effort into bringing this up to par. One of the issues that we had was just that. The rest of the frame was in beautiful condition, but we had rotted through the rear crossmember. Now normally it's one of two choices. You can either try and cut the rust out and patch in new pieces, in which case you still have to drop the fuel tank and the cradle to be able to access it, to be able to weld safely in it. The other choice, obviously, is the entire frame, which is a huge undertaking. And some of you out there who may have done that already understand how many hours you can put in doing a frame replacement. We offer a third. What we have is a rear crossmember replacement that can be welded in place of the original, after you drop the tank on these. No matter what you have to drop the tank. So either way it is something inevitable and something you're going to have to do. Once the tank is down, you can simply cut at the end of the existing frame rails, and these slip joint, that we welded on the back of the crossmember will slide over the frame, can be welded in place and you end up with results like this. Nice and smooth. As new. Beautiful condition. And you can see, all the bolt holes line up so it's an easy area installation of the rear bumper once you get everything back in. Now you can take a look up underneath and you can see how clean an application this is. The gussets are already in place. We wanted to make you aware of this. Now those of you that have noticed this is not the direct application that I have here for this vehicle. This is strictly for demonstration purposes so you can see what we've done to be able to create this kind of product. So, if you're doing an upgrade or you're restoring an old Defender, not only do we have the rear bumpers, but we have a number of parts that will help you do that, and come Spring you will be in perfect shape to be on the road again. Again, my name is Doug. I appreciate you tuning in. If you need any other information you can talk to any of our knowledgeable salesman. 1-800-533-2210. Have a good day.
Applies To These Models:
Defender 90 | '94-'97
Land Rover Series II/IIA | '58-'71
Land Rover Series III | '71-'74
This video has been viewed: 3164 times
for Exclusive Offers & Latest Deals
Please wait while we calculate your shipping cost.....
Sign-Up Now And Enjoy
YOUR FIRST PURCHASE
Thank You For Subscribing!Check your inbox for 10% off your first order.
You are already subscribed!This offer is only available to new subscribers.