Rover Resources Center
Headlight Wiper / Wiper Arm Replacement On A Range Rover Full Size
Watch Doug, our Land Rover Master Technician, show you how to replace the headlamp wiper blade, or if necessary, the entire headlamp wiper arm on a Range Rover Full Size, 2003 - 2005 (L322). Applicable Part #s
DKB000240G (wiper arm RH), DKB000250G (wiper arm LH) and DKC000070G (wiper blade only). Questions about this video? Call us at 1-800-533-2210 or contact us live chat. Part #s: DKB000240 / DKB000250 & DKC000070 Headlamp Wiper and Wiper Arm Replacement on a Range Rover Full Size (L322) 2003-2005, 8-Cylinder Gasoline, North American SpecificationHi I'm Doug. I'm the tech support representative here at Atlantic British. In this video we're going to touch base on a maintenance item that is usually neglected. And this is on the Full Size L322 Range Rovers. And assembly procedure is essentially the same from 2003 all the way up to 2009. And what I'm talking about are the little windshield wiper blades for the headlights. Now you have washers and wipers for these which will help you gain and hold your visibility in foul weather. So they could be just as important as your regular wiper blades. So we have 2 different offerings here at Atlantic British. You can get either the wiper blade by itself, DKC000070. Or you can get the wiper with the blade and arm complete because sometimes over a period of time, especially if you live in an area where they deal with a lot of salt or alot of foul weather you can get corrosion build up in the pivot. And you'll know that the arm needs to be replaced if you can pull it out at about a 45 degree angle. And if you let go, and it doesn't return on its own it needs to be replaced. So then you would do the full assembly. In this case, we have a good arm, we have good retraction. Good pressure against the headlight. So we're going to show you how to remove and reinstall the wiper blade, and then I'll show you how to install the arm. Now the blade itself, the blade pivots, and it's just held in place by a little push pin right here. In which case you can just take a pair of needle nose pliers, and push down on the top of that pin. You'll feel the bottom retract out. Simply pull that out. And lift the blade up and out of the arm. And take your new blade out of your bag. Reinstall the same way you took it out. And you just simply push in until you see that pin hole line up. You can install the pin from the top. Being the little slot, or the D tent that holds it in place is dead center, you don't have to worry about which end you are going to install first. Just simply push down in place. Center the pin. Check your pivot. And you're good. Now should you need to replace the arm, it's a reasonably easy replacement. This cover cap, just simply pull back and pull out of place. You'll see the holes are slotted, so it just simply pulls off. You have a nut, which is a 10 millimeter, you take that nut off. Put it somewhere where you're going to find it when you're looking for it. Then you can take the same pair of needle nose pliers and in that little opening where the shaft and the boss off the bottom of the headlight, you can just put that in there and give it a little wiggle and it will pop that out. Slide the arm off. Take your new assembly out of the bag. And you're going to reinstall it the same way you took it off. And this is going to sit pretty well parallel with the top of the bumper. And you just want to get an idea, let's see, okay, we're looking good. We're level with the bumper. We put our nut back on. Take your 10 millimeter. And it doesn't have to be super tight. Bring it in until you feel it snug up. And then just give it a little push to lock in. We'll take our cover plate. Slide that back in. Push in place. And there. You've replaced your wiper. Now assembly and everything is exactly the same for the other side. And it's always best you do one always do the other. So again, this is something that a lot of people neglect. They don't really think about it. But it really should be replaced on a regular basis. So when you're ready to change over the wiper blades or wiper arm assemblys on the headlights on your L322 Full Size Ranger, give a call to any of our knowledgeable salesmen, 1-800-533-2210. Thanks for watching.
Applies To These Models:
Range Rover Full Size 4.4 (BMW Engine) | '03-'05
This video has been viewed: 1211 times
for Exclusive Offers & Latest Deals
Please wait while we calculate your shipping cost.....
Sign-Up Now And Enjoy
YOUR FIRST PURCHASE
Thank You For Subscribing!Check your inbox for 10% off your first order.
You are already subscribed!This offer is only available to new subscribers.