Land Rover Discovery 2 owners searching for a durable bumper have come to the right place! This heavy-duty bumper is manufactured by UK Rover specialists Britpart and designed specifically for your Discovery 2 (1999 - 2004) model vehicle. This bumper is manufactured from 4mm steel, finished in black, and includes incorporated steel end caps, two (2) recovery points, and two (2) hi-lift jacking points. It is fixed to your rover's standard mounting points for added strength, but also includes fixings in the center where your tow bar mounts.
If you use your Discovery 2 heavily off-road or if you're looking for the protection a heavy duty steel bumper can offer in daily driving, this is the bumper for you. Bumpers can sustain significant damage over the lifetime of a vehicle. Replace your old bumper with this rugged, top quality replacement bumper!
Note - Rear lights pictured are sold separately.
Nowadays you can find a good used and affordable Discovery Series II for $3,500 - 5K. Add another $3K - 5K and you can outfit your Discovery II for off-road in no time. Watch Doug, our Land Rover Master Technician, in Part Two of our video how-to series, as he removes, replaces and installs the front (DA5645) and rear (DA5646) bumpers with new heavy-duty steel bumpers to give the vehicle front and rear clearance for off-road use. Doug will also address the installation of a winch, an essential accessory for off-road use, to the front bumper. Questions about this video? Call us at 1-800-533-2210 or contact us via live chat.
(Total of 23 customer reviews) | Review this item
4 out of 5 stars | Date Posted: 06-19-2017
By: J. Clayton Read
We were grateful that the folding rear step still worked and did not have to be messed with during the bumper installation. We we overall pleased with the looks but not wild about the transition from the rear side plastic to the steel bumper. Four out of five stars indicates the wish for better installed online photos. J. Clayton Read, Owner: Clayton's Garage
4 out of 5 stars | Date Posted: 09-18-2016
By: greg mullenski
Great replacement bumper. Heavy duty for sure! Very solid! I wish extended a couple inches more. Was a tight fit up against bumper trim screw , had to cut/grind about a 1/4 inch to fit around screw tab , touched up paint around cut. Looks great and way stronger then stock bumper plastic bumper cover was a joke! Hope this helps out ? Well worth money spent for your upgrade! Only bad thing it's added weight 69.4 lbs , but discos are meant to be tough !
5 out of 5 stars | Date Posted: 09-07-2016
By: James Trott
The bumper was on sale but not in Stock at the west coast store. After letting the sales rep know that I wanted to will call the bumper from the So Cal location it was sent there in less than a week. It installed easily and fit perfectly. Looks much better then the trail damaged stock plastic bumper it replaced.
4 out of 5 stars | Date Posted: 08-30-2016
By: adam payne
Looks awesome. Very heavy duty. NOT a one man install tho. You will definitely need a prybar. Comes with new hardware. Fits tight but all in all very pleased with this product. Installation is a 4 out of 10 on difficulty. 4 bolts, a prybar and an assistant are all there is to it. Great product.
5 out of 5 stars | Date Posted: 08-01-2016
By: John Collings
So, why five stars? Well, this bumper appears well made, fits well and the semi matt black finish looks great on the Disco... There was a little bit of wrestling around with the tow bracket bolts to get it all to line up, but nothing too serious, and once in place, it looks GREAT. I love the fact that it wraps around the corners, and has the jack points and recovery points all built in. Highly recommend it.
5 out of 5 stars | Date Posted: 07-14-2016
By: Nancy Hinojosa
I really liked the price and the fact that I received free shipping. It kind of matches the ARB front bumper on my Discovery and it looks like it will last a long time. Although I didn't mount it myself, the body shop guys said that the four mounting screws would offer extra support. The bumper looks pretty sharp.
5 out of 5 stars | Date Posted: 07-04-2016
By: john lockey
This sturdy bumper was easy to install,fit perfectly and looks marvellous.Wife will never be able to break this one!Highly recommend this product for quality,style and value
5 out of 5 stars | Date Posted: 06-24-2016
By: James P. Dowd
the Britpart bumper fits perfectly, no noodling .no shims. It was simple to install and took less than an hour. It looks great and has a cleaner profile than the OEM product. I have never understood why a truck than can roam the earth comes equipped with "disposable" bumpers. Great product!
5 out of 5 stars | Date Posted: 03-15-2016
By: CHRISTOPHER DENNISON
The OEM bumper was removed and the heavy duty bumper installed with little effort with 4 bolts. All hardware is included. When you consider the price of simply replacing the plastic shroud of the original bumper it's an easy decision. The new bumper provided a slight departure angle improvement and jack points as well as recovery points. The lights click in effortlessly. A great improvement and collision upgrade.
2 out of 5 stars | Date Posted: 03-10-2016
By: David Anthony
The part of the bumper that slides under the bumper hitch is very difficult to align, in fact I still haven't gotten the bolts to fit yet! My bumper hitch is still off - The video of the rear bumper skips the part where they put those 2 bolts in ? still work'n on it !!! dea
5 out of 5 stars | Date Posted: 03-08-2016
By: Dirceu Magalhaes
Just what i was looking for. super easy to install. i sprayed mine with Line-X for extra protection. cant complain!
5 out of 5 stars | Date Posted: 02-16-2016
By: Douglas Titterton
Perfect fit very sturdy easier to just remove center of trailer hitch
3 out of 5 stars | Date Posted: 01-28-2016
By: Woodrow Bennett
First of all, this is not a one person install. Get help or you might scar the paint on either end of the bumper. It went together nicely other than the two bolt that go through the hitch receiver. Those bolt holes are 1/2" - 3/4" off and need to be reamed to fit. Also the tab that contains the holes is slightly too long to sit nestled behind the seam. Other than that, I like it. The lights set in nicely and the clearance around the body is tight.
5 out of 5 stars | Date Posted: 01-18-2016
By: brandon theis
After stepping up onto my rear bumper one afternoon and feeling it sag beneath me, I took interest in searching for a sturdier replacement. This heavy duty steel bumper looks great, installs easy, and provides more recovery point options in case you need it. Very pleased with the purchase.
4 out of 5 stars | Date Posted: 12-03-2015
By: David Rogers
Replaces flimsy plastic bumper Packing was poor -Looks like it was dropped as both ends are half inch high whalers they wrap around the corner once mounted. 2 Main bolts easy to install but the two hitch brackets bolts were a bear to get aligned. Im hoping a body shop can align bumper so I can reinstall the side pieces
4 out of 5 stars | Date Posted: 11-29-2015
By: John Rouleau
Definitely the best price on a steel bumper with recovery points. Looks great on our Disco, much better than the broken stock one! A couple of slight imperfections/chips on the powder coating from the manufacturer but nothing worth sending it back for...overall great bumper
5 out of 5 stars | Date Posted: 10-26-2015
By: Richard Tupa
Perfect steel bumper fo Discovery II. I reviewed u tube video on how to install. Applying penetrating fluid before hand was a great help. Installed in less than a hour by myself. Everything lined up perfect. Normally do not bother with reviews but my installation went so well needed to share. Rick Kemah Tx
2 out of 5 stars | Date Posted: 09-22-2015
By: Kevin Rae
The holes on the bracket that goes between the body and hitch assembly did not line up. Had to open the holes up on the bumper to make it fit correctly. I would recommend this product for people with metal working skills
5 out of 5 stars | Date Posted: 04-09-2015
By: tom carr
Great looks, great price, just needed a little shimming with extra washers to match up all four mounting points. Highly recommended.
5 out of 5 stars | Date Posted: 04-01-2015
By: Donald Dulin
Took a leap of faith on this new bumper and I am not disappointed. Just got my Disco back from the body shop and even they were highly impressed. Anxious to see how the finish holds up, but it looks to be pretty durable. Just a little shallower than the OEM, but doesn't seem to be an issue at all. Not sure what the holes in the bumper are for, but will ask AB rep about it. I do recommend this bumper to anyone needing one.
5 out of 5 stars | Date Posted: 02-01-2015
By: Jerry Rhodes
I would recommend this bumper to anyone looking to replace a damaged one or as an upgrade.
5 out of 5 stars | Date Posted: 09-30-2014
By: Rayden Vega
I am extremely happy with this rear bumper. Really heavy duty. I got a deal on a free shipping my UPS guy had to call me help him to get it out of the truck. Really nice bumper. Thanks Atlantic British!
4 out of 5 stars | Date Posted: 07-14-2014
By: Collin Hayles
I don't normally do product reviews...of which I have had many opportunities. I will however, gladly take this opportunity to do a positive review of the DA5646 bumper. To me it seem quite obvious that the Da5646 bumper is a great offering advantageous to anyone seeking to replace the flimsy OEM plastic bumper. Similar products offering are priced substantially higher without any justification. This bumper was easily fitted with minimum exertion. Granted, it weights approximately 70 lbs......however with the use of a floor jack and another individual of average strength, it is easily fitted. I would not hesitate to recommend this component to anyone.
SIGN UP for Exclusive Offers & Latest Deals
Please wait while we calculate your shipping cost.....