Instructions
Range Rover Classic Front Lamp Guards
Applies To:
Item: 9450S
Fits: Range Rover Classic | '87 - '94
Kit Contains
2-Front Guard Assemblies, 2-Lower Pivot Bushes, 2-M6 Taptite Screws, 10-Self Tapping Screws, 1-5mm Allen Key
1. Open bonnet and offer guard to vehicle.
2. Ensure correct alignment then mark hole positions.
3. Drill 3.8mm holes in wing lip and top panel for self tapping screws.
4. Drill 5.5mm hole in bumper for M6 Taptite screw.
5. Bumper can be adjusted for correct height, seating of pivot in lower bush, if required.
1
Select Model 
