Instructions
Range Rover Classic Rear Lamp Guards
Applies To:
Item: 9404S
Fits: Range Rover Classic | '87 - '95
Fitting Instructions:
1. Remove lamp assembly (including gasket) from vehicle.
2. Position guard with welds on underside of slats.
3. Fit to body using existing self-tapping screws (do not remove hinge brackets from guard.)
4. Clamp side bracket in required position. (do not over tighten M6 screw.)
5. Remove self-tapping screws from hinge brackets and remove guard.
6. Replace lamp assembly and slide hinge bracket (attached to guard) between gasket and vehicle body and clamp in place using existing self-tapping screws.
7. Close guard over lamp and replace plastic knob.
1
Select Model 
