Instructions

AM/FM Power Antenna

Applies To:

Item: 9124
Fits: Discovery I | '94 - '99

This antenna is designed for optimum performance for either AM or FM bands. The antenna is raised or lowered by operating the radio on/off switch.

Prior to installing the antenna, read the entire installation instructions.

Replacement of existing power antenna, removing old antenna:

Gain access to the underside of the fender area through the fender, splash panel.

Remove mounting bracket, drain tube, electrical wire and antenna coaxial cable. When removing electrical wires and coaxial cable from the antenna, follow to the closest connector and disconnect. DO NOT CUT COAXIAL CABLE.

Disassemble the mounting base, and save the parts, they may be used with the installation of the new antenna.

Remove old antenna from below fender.

To avoid cutting car wiring, you may want to cut the connector off of the old antenna removed from the car, attaching the new antenna wiring to the old connector wires and directly plug into car wiring.

1  2  3  4 

Complete Product Instructions List Page