Atlantic British Ltd. - Largest Independent Supplier of Parts & Accessories for Land Rovers

Remove existing air dam (Figure 1).

Remove left hand kick panel from driver’s foot well (Figure 2).

Install relay in the only open receptacle on the panel under the kick panel and reinstall the panel.

Remove the blanking plug from the dash. Use the slot next to the cruise control. The wires that plug into the supplied switch are located behind that blanking plug. Plug in the wires and install the switch.

Install fog lamps into the new air dam.

Open the hood and look behind the headlights and you will find the wires with the plug ends that attach to the plugs on the fog lamps and feed them down to be attached to the fog lamps.

Reinstall the new air dam and plug in the lamps.

The fog lamps will only operate on the low beam setting of the headlamps and the headlamp switch must be on.