Print This Page

Instructions

Discovery I Front Lamp Guards

Applies To:

Item: 9450D
Fits: Discovery I | '94 - '99

No Drilling Required to Fit

Tools Needed

  • 24mm or 15/16" Spanner
  • Cross Head Screw Driver

1. Loosen nut on power wash jet body from below front bumper sufficiently to allow curved bracket to slide underneath. This can be accomplished without removing the water pipe, when bracket is in position -- re-tighten nut.

2. Offer guard to align with curved bracket and top mounting tabs will be positioned over square holes in top panel. Fit plastic inserts supplied into square holes and attach guard with self-tapping screws.

3. Finally, tighten all fixings.

Complete Product Instructions List Page