Seasonal Picks
Print This Page

Instructions

Range Rover Brush Bar

Applies To:

Item: 9403S
Fits: Range Rover Classic | '87 - '94

 

  1. If vehicle is fitted with plastic spoiler, do not remove it from vehicle.

  2. Cut 2 vertical slots below bumper in spoiler 4 ½” high x ¼” wide at  31 5/8” centers.

  3. Remove bumper bolts from end of chassis.

  4. Fit Bull Bar through slots and align holes.

  5. Re-fit bolts and fully tighten.

 

TOOLS REQUIRED

2 X 9/16” Wrenches, Stanley Knife, Measuring Tape

 

 

1

Complete Product Instructions List Page